Shenshiyin 4/8/16-CH, Руководство по эксплуатации

Страница: 28 / 59

Digital Video Recorder User Manual
Stop:
close alarm output.
Status:
current device alarm output status .
3.4.6 Abnormity
Main menu → Alarm → Abnormity
Abnormality, as shows in picture 5-22,
Event type:
no disk space, hard disk error, Not enough space, network failure ,IP address
conflict,,.
No disk space:
DVR does not connect to the disk or hardware is error.
Disk error:
The system can not recognize because of disk error
Not enough space:
Not enough space for the disk (the percentage of free space will be
showed)
Network failure:
The network connection disrupted or network connection error
IP conflict:
The IP address of disk recorder network is fixed, the conflict will occur once there
is another same IP is set in the internet.
Enable:
function enable switch, reverse means “on”
Alarm output:
when exception occurred, system enables peripheral alarm devices
Latch:
system auto delays for a specified time. The value ranges from 10-300 (Unit: second)
On-screen:
reverse display means allowing on-screen. There is connection motion on the
screen when alarm signal happens.
Send email:
System can send out email to alert you when alarm occurs.
Buzzer:
Default is “off”
3.5 System setup
Submenu:
General, Encode, Network, Input, User Management, Pan/Tilt/Zoom, Serial Port, Tour.
Note:
system setup will be done by user who has the authority
27