Shenchen Peristaltic Pump
V6-12L Series
- 7 -
Click the
Setting
button in the main interface, then click
Suck-Back
button to
enter the back suction angle setting interface. Click
angle
button, enter
suck-back angle then click
ENT
. This can set all suck-back angle when motor
stop running, except
dispensing
is
ON
.
6. External Setting Interface:
External Setting Interface as below:
Click
Setting
button in the main interface, then click
External control
to enter
Extrocontrol Settings
interface.
A. According to the external port speed analog input signal to select signal ,
0-5V , 0-10V ,4-20mA analog signal three kinds of optional analog signal.
voltage range and the motor speed is linear.
B. External control and commutation of the motor start-stop signal is divided
into two kinds : level mode and pulse mode.
Specific interface, see details in describes external control interface .
C. Various independent external control mode setting switch work only
when the corresponding external control function is turned on.
7. Communication Setting Interface:
Communication Setting Interface as below: