Shenbao SBR-26.0H-B-S, Инструкция по установке и эксплуатации

Страница: 6 / 20

The functions of the wire controller
1) Wire Controller Button Definition
Remarks: Standby status means the unit is connected with electricity but not running.
3.Wire controller operation guide
" "Button------To turn on or turn off your heat pump
You may turn on or turn off the heat pump in any state.
" "button------Button for different mode
Press this button to switch the working mode. Continuously press this button ,
the modes circularly switches as follow.
Remark
：
water cooler ( 0)with cooling mode only
water heater ( 3 )with heating mode only
water cooler and heater(1)and electric heater(2) with auto, cooling , heating , 3 modes.
" "button and" "button------
Up and down button
Integrating with "SET" button to check or change each data value.
" "button------
Button for setting
Integrating with " " button and" " button to check or change each data value.
" "button------
Button for timming
Integrating with " "and " "button
，
to set the time for turning on or turning
off the heat pump .
If you choose the model with electric heater,press this button may start or shut off
the electric heater.
Initialization Stand by status Start-up state
Auto
Cooling
Heating
3
SWIMMING POOL HEAT PUMP