STEP #6
– Lubricate The Rods / Bearings
5
•
Push the rod away from you until the bumper hits the opposite wall. Apply two or three drops of
lubricate on the face of the bearing and rod using the Super Lube Tube furnished with the game.
Rotate the rod while pulling the rod toward you to evenly spread the lubricant on the rod. Perform
the same operation on the opposite bearing face and rod. Repeat as needed.
STEP #7
– Rotating The Bushings
•
Once a year the bushings should be rotated 180 degrees to assure an even wear of the bushing
surface. To accomplish this rotation remove the rods from the game and push a 7/8" socket head
over the bushing fingers (Drawing - A). Push the bushing out of the hole and rotate the bushing
180 degrees (Drawing - B). Snap the bushing back into place and return the rod and men to the
game.
7/8 "
7/8 "
7/8 "
Drawing - A
Drawing - B
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
