STEP #3
– Rods, Bumper And Men Assembly
•
Once the table legs are secure, (using two people) pick the table up and turn it over onto its legs.
•
Locate the five man rods… These two rods will be located in the center of the game as illustrated
below. Note… The men are designed with a slight press fit onto the rods in order to maximize
playability.
°
°
°
°
Place the five man rod through the bushing in one wall… Slide on the first bumper making sure
that the larger hole in the bumper is away from the wall and toward the man. This will allow
the bumper to snap onto the shoulder of the outside man.
Slide on the five men and the second bumper and slide the rod through the bushing hole in the
far wall… Note that the red and black men face in opposite directions as shown in the
illustration. In some cases you may need to add a small amount of lubricant inside the
shoulder hole of the man to ease the sliding of the man onto the rod.
Align each man over a hole in the rod and drive in a spirol pin. Note: place the rod block under
the rod before hammering in the spirol pins.
Snap the bumpers onto the shoulder of the outside men. This can be done by pulling/pushing
the men into the side walls until the bumpers are securely seated.
•
Repeat these operations for the 3-man, 2-man, and goalie rods. Note: the 3-man and goalie rods
both have three holes. The goalie rod is the shorter rod.
3
Goalie Rod – Shorter
Than Three Man Rod
Two Man Rod –
Longest Rod
Black Men
Five Man Rod
Black Men
Three Man Rod – Longer
Than Goalie Rod
Black Men
Black Men
Ball Return
Red Man
Red Man
Three Man Rod – Longer
Than Goalie Rod
Red Man
Five Man Rod
Red Man
Two Man Rod –
Longest Rod
Goalie Rod – Shorter
Than Three Man Rod
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
