Shelters4Less SR1551, Руководство по сборке

Страница: 8 / 12

PCE1
2MD
SS
RC1
PCE1
RC1
SS
2MD
Step 4
Stick sealing strips ( SS )on top of the rafters and align roof panels ( PCE1 ). Apply more
sealing strips to the top of the roof panel directly above the first sealing strips. Fix the
RC1 strips on the edges and over the gap between the roof panels and screw in with
50mm Tech screws. With a mallet tap the 2MD edge trim on, to seal the roof panels.
Then fit the black plasic caps on exposed nuts and bolts. Fit the square plastic end
caps (EC40) to any open ends of box sections.
8
NOTE:
THE 50mm TECH SCREWS ARE
FOR FIXING ROOF STRIPS
(RC) ONLY
SEALING STRIPS TO BE ATTACHED
TO RAFTERS AS BELOW