Device Inclusion
To add a new Shelly device, connect it to the power grid.
Step 1
Install your Shelly into the light socket and turn the light on.
⚠
WARNING!
In case the
Device has not created its own Wi-Fi network with SSID like
ShellyBulbDuo-35FA58
for
the white model or
shellycolorbulb-35FA58
for the colored version check if you have
power connected to Shelly. If you do not see an active WiFi network with SSID like
ShellyBulbDuo-35FA58
or
shellycolorbulb-35FA58
, reset the Device. If the Device has
been powered on, you have to power it off and on again 5 consecutive times*. Or if
you have a switch/button connected to the Device, press it 5 consecutive times*.
When the light starts to flash Shelly should return to AP Mode. For Shelly duo RGBW
– light will start to flash in red, next time you switched off and on it will light in blue -
this mean that the bulb is in AP more, If not, please repeat or contact our customer
support at
*Upon each OFF state, please wait 2-3 seconds.
Step 2
Choose “Add Device”. In order to add more Devices later, use the app menu at the
top right corner of the main screen and click “Add Device”. Type the name (SSID)
and password for the WiFi network, to which you want to add the Device.
