Seep:
Apply toner to cotton round. Place on head of unit. Place plastic ring on top of gauze. Use
on face for 1 to 2 minutes. This allows for a deeper cleanse making sure that all makeup has been
removed. This mode includes EMS, biomechanical vibration, and red LED for rejuvenation.
Lift:
This mode includes EMS, vibration, and heat. Press the “intensity” button for more heat.
Restore:
This mode includes EMS, vibration, and LED. The is your nourishing mode for driving
product deeper into the skin. Great for dehydrated skin or if there is an ingredient you are wanting
to drive deeper into the skin (example: for pigmentation). You can use this with red, blue or
orange LED. Just press the mode button to change LED color.
Eye:
Gentle pulses stimulate sensitive eye area. Use a light pressing technique around the eye.
Hold and press for two seconds, lift, and move to next area. Repeat.
Cold:
This mode includes blue LED light for calming.
Skin Test Before Using
Please do a test before using the skin enhancer for the first time. You may do this in the cleansing
mode which comes on first when the unit is turned on. Turn the intensity level up to level 3. Apply
a cleanser to the inside of your forearm. Use the unit on top of the cleanser for 2 to 3 minutes.
Rinse cleanser off your arm. If you see any redness, please test again on other arm at a lower
intensity level.
Note:
Please be sure to test in advance. If there are abnormal conditions such as rash, itching,
irritation, etc. on the test site, please stop the test immediately and discontinue use of this unit.
Note:
Start all modes on the lowest intensity level. Once you determine you can handle that level
you may then move to the next level of intensity.
NOTE: Do not use the unit immediately after a strong acid peel or hair removal.
Contraindications
Pregnancy
breastfeeding
Pacemaker
Metal implants in face, dental implants
Open wounds
Recent plastic surgery or eye surgery (get Physician approval)
Atopic Dermatitis
Sensitive skin
Long-term use of steroids
Malignant tumors
Abnormal blood pressure
Currently receiving care for cancer (get Physician approval)
Cleaning After Use
Clean unit with damp soapy cloth. Wipe with a dry cloth.
Do not immerse unit in water.
Do not use in shower.
Carefully wipe removable plastic ring with damp soapy cloth.
Do not use corrosive solutions such as alcohol to clean your skin enhancer.
