Seite 36 von 45
CHECKS AT BEGINNING OF SEASON
Make sure the power supply cable and the outlet are fault free and that it is properly
grounded.
Make sure the plug is properly fitted to the condensation outlet and that the filters
have been inserted.
Observe the installation and safety instructions precisely.
SELF DIAGNOSIS
The appliance has a self-diagnosis system to identify a number of malfunctions.
Error messages are displayed on the appliance display:
DISPLAY
ACTION
LOW TEMPERATURE
Frost prevention
The appliance comes with a frost protection
device to avoid excessive formation of ice.
The appliance starts up again automatically
when the defrosting process is completed.
FULL TANK
Watertank is full
Empty the internal safety tank, following the
instructions in the "Emptying the water tank"
paragraph.
PROBE FAILURE
Sensor damaged
If this is displayed, contact the local authorized
service centre or check
www.schuss.at
for
further informations.
