USM 635 en
6
2011
-08
-25
15. Avoid accidental start-up
―
Make sure that the machine is switched off
before connecting plug to power outlet.
16. Pay attention
―
Pay attention to what you are doing. Work
intelligently. Do not use electric tool if you
are not concentrated.
17. Check electrical tool for possible dam-
age
―
Before further use of the electric tool, protec-
tive equipment or slightly damaged parts
must be carefully examined if they function
properly and in accordance with their intend-
ed use.
―
Check if movable parts function properly
without jamming and check if any parts are
damaged. All parts must be correctly in-
stalled and meet all requirements in order to
guarantee perfect operation of the electric
tool.
―
Do not use damaged grinding wheels.
―
Unless otherwise specified in the operating
instructions, damaged protective equipment
and parts must be repaired or replaced ac-
cording to their intended use by an author-
ized service center.
―
Damaged switches must be replaced by an
authorized service center.
―
If an electric tool cannot be turned on/off via
its on/off switch, it should not be used.
18. Attention
―
Only use replacement parts recommended
by the manufacturer.
―
The use of other inserts and accessories
may cause risk of injury and warranty loss.
19. Have your electric tools repaired by a
certified electrician
―
This electric tool is in conformance with rele-
vant safety regulations. Repairs may only be
carried out by a certified electrician by using
original spare parts; otherwise there is a risk
of accidents for the user (loss of warranty).
