- 2 -
FEATURES
HOW TO USE
CHARGING
Before initial use, charge the rechargeable battery fully, this typically takes 1.5 hours. Charge the
head lamp using a USB charger (not supplied). The battery contained within the head lamp may only
be partially charged when unpacked.
1. To remove the lamp unit, pull the head lamp rim open and push the lamp out from the hat. Then
pull off the USB charger cover (Fig. 1)
2. Plug the head lamp USB charger plug into the corresponding socket of the USB wall charger
(not supplied) or 12V USB car charger socket (not supplied), power bank or similar device with
minimum DC5V 1000 mah output USB socket. Plug 220-240V USB wall charger into wall socket
outlet or power board and switch on (if power board socket is individually switched). Plug 12V
USB car charger into 12V lighter socket in car or 12V socket outlet of generator or similar device
charge ports.
3. The battery indicator light will illuminate white whilst charging, when the battery is low or has
partial charge. When the battery is fully charged, the indicator light will close.
Note:
This hat is fitted with a safety protection device that protects against over-charging or
discharging and will automatically turn off. This will extend the life of the battery.
LAMP
ON/OFF
PUSH BUTTON
LAMP ASSEMBLY HOLE
USB CHARGER COVER
USB CHARGER PLUG
ON/OFF PUSH BUTTON
FIG 1.
