Sharper Image SP6075, Руководство пользователя

Страница: 28 / 32

BASE BASIC SETTING FROM THE HANDSET
You can set some of the basic base functions from the cordless handset.
The base must be powered up and in idle mode, otherwise you will hear an
error tone when you try to access the "BS SETTING" menu.
To set base ring melody and volume
1). In standby mode, press
button to enter setting mode,
press or button to find " BS SETTINGS",
2).
3). press
button to enter next step base setting,
press or button to find "RING SETUP"
4).
5). press
button to confirm , display will show " BS MELODY"
press or button to choose your favority ring melody type (total 5 kinds)
7 ).
12). press
button to confirm your setting,
13).press button to return to standby mode.
6). press
button, display will show default melody type(for instance : MELODY 1)
8). press
button to confirm melody selection,
press or button to choose "BS VOLUME"
9).
10). press
button, display will show default volume (for instance : VOLUME 2)
.press or button to choose your favority ring volume (total volume off)
11) .
To set dial mode (TONE or PULSE)
The default setting of this telephone is TONE (also called Touch Tone, MF or DTMF)
It is recommended dial mode , you need not modify it except special requested
netwrok.
by
1). In standby mode, press
button to enter setting mode,
press or button to find " BS SETTINGS",
2).
3). press
button to enter next step base setting,
press or button to find "DIAL MODE"
4).
5). press
button to confirm , display will show "TONE"
press or button to choose "TONE" or "PULSE",
6 ).
7). press
button to confirm your select dial mode,
8). press button to return to standby mode.
To set flash time
1). In standby mode, press button to enter setting mode,
press or button to find " BS SETTINGS",
2).
3). press
button to enter next step base setting,
press or button to find "FLASH TIME"
4).
5). press
button to confirm , display will show ex-factory value(100, 300, or 600)
press or button to choose one kind of three,
6 ).
7). press
button to confirm your selected flash time
8). press button to return to standby mode.
The Flash (also called Recall) may be needed if you are
connected to a PABX.
However, you can select from 3 flash times: 100ms, 300ms and 600ms to meet
your telephone line or PABX requirement.
~26~