Sharper Image SI-160, Руководство пользователя, Страница: 7 / 18

7 English
The Water Tank is the reservoir where water is held before being transferred
to the heat exchange and converted to steam. The Water Tank holds 8.45
ounces (250ml).
To fill the Water Tank, push the Water Tank Release Button and pull upwards.
The Main Body can be used as an individual handheld unit with attachable
and interchangeable accessories for cleaning and sanitizing.
The Steam Indicator Light illuminates orange when the unit is plugged in. The
Steam Indicator Light will flash orange for approximately 25 seconds while
the unit is heating. The light will stop flashing and be a steady orange when
ready to produce steam.
The Accessory Release Buttons (4A and 4B) lock the accessories into place.
When pressed Steam Trigger will start the flow of steam from the Steam
Nozzle.
The Steam Adjustment Switch will release a more powerful stream of steam
when the switch is slid up towards the Steam Nozzle.
The Extension Pole connects to the main body of the unit for use as a mop
(with Mop Head attachment) or to extend the Steam Nozzle attachment.
The Mop Head connects to the Extension Pole for steam cleaning a variety
of floors. NOTE: It is NOT recommended that this unit be used on unsealed
floors. Use care when steaming floors that may be warped or damaged by
heat and moisture, and limit use of this unit on these types of surfaces.
The Utility Brushes connect to the Jet Nozzle and are designed to scrub
tough dirt and scuffs from surfaces.
The Brass Brush connects to the Jet Nozzle and is designed for scrubbing
especially tough stains. NOTE: Use careful judgement when deciding what
surface to clean with the Brass Brush. Some delicate surfaces, such as
stainless steel, may be scratched or damaged by the brass bristles. If you
are unsure whether or not a surface will be damaged, it is recommended
1
1A
2
3
4A
4B
5
6
7
8
9
10