Sharper Image SI-160, Руководство пользователя, Страница: 15 / 18

15 English
PROPER STORAGE
Preparing your 2-In-1 Steam Mop for storage is quick and simple. When you have finished
your steaming tasks, follow the steps listed below.
1. Unplug power cord.
2. Allow unit to completely cool (at least 30 minutes).
3. Remove all accessories from unit.
4. Remove Water Tank and drain any remaining water into a sink or tub to minimize
potential mineral build-up. Replace Water Tank when done.
5. Store unit in a cool, dry location, along with all included accessories.
MICROFIBER PAD CARE: Machine wash warm, separately. Air or tumble dry low. No fabric
softener or bleach.
MINERAL BUILD-UP
A common maintenance need for steam appliances is the removal of build-up caused by
high mineral content in many municipal water supplies. This mineral build-up may limit the
effectiveness and reduce the life of your product.
The best way to minimize mineral build-up is to use distilled or de-mineralized water when
using your 2-In-1 Steam Mop. If you are unable to use distilled water, it is recommended
that the following procedure be followed monthly to remove any
mineral build-up:
1. Follow Steps 1-4 under Proper Storage section above. However, do not replace Water
Tank at the end of Step 4.
2. Fill a measuring cup (not included) with 2oz (59ml) distilled water and .5oz (04.7ml)
vinegar.
3. Slowly pour water-vinegar solution into Water Tank then replace Fill Cap.
4. Plug in power cord to turn unit on.
5. Let steam release from the unit for 1 minute then turn unit off by unplugging it.
6. Allow unit to sit for approximately 30 minutes, then let steam release until the Water Tank
has been emptied.
7. Once Water Tank is drained, turn unit off and refill Water Tank with 8.45 ounces (250ml)
of fresh distilled water. Allow unit to produce steam until Water Tank is empty. Repeat as
necessary until vinegar odor dissipates.
8. Turn unit off by unplugging power cord and store as usual.
IMPORTANT: On average, it is recommended that you follow the mineral build-up removal
procedure once per month (if unit is used once every week). More frequent use may
require following the procedure more often in order to keep your 2-in-1 Steam Mop
operating at full potential. Do not exceed 20 hours of use without cleaning out mineral
build-up.
STORAGE & CARE