background image

 

 

TUNER/TIME SET: 

1.  In “DATE SET” mode or “ALARM SET” mode, press the [+] button to increase and 

press [-] to decrease digital values. 

2.  In RADIO mode, short press the [+] & [-] buttons to manually adjust the frequency.  

Long press to auto search forward [+] and for backward [-] selection.   

SNOOZE/NAP:

  Press the SNOOZE/NAP bar to snooze. This will automatically activate 

snooze time for nine minutes. Or you may choose to set the alarm in 15, 30, 45, 60 minutes or 

OFF for nap. 

 

Controls located underneath Clock Radio:  

Backlight HI/MED/LO

:

 Slide switch to select the brightness level of backlight on display. 

C/F:

 Slide switch to interchange between Celsius (°C) or Fahrenheit (°F) for temperature level.  

Daylight Savings Time:  

Slide DST ON/OFF switch to activate or inactivate the Daylight 

Savings Time feature.  

DATE/TIME:

  

1. Press and hold [DATE/TIME] button for more than 3 seconds, and enter the “DATE/TIME 

SET MODE” setting.  

2. Press [DATE/TIME] button once, to set “year->month->day->hour->minute-exit” 

 

 

USING INDOOR TEMPERATURE 

The unit will begin reading indoor temperature when it is plugged in. Allow a few minutes for the 

correct temperature to register on the LCD display.  

 

USING OUTDOOR TEMPERATURE 

Be sure the Clock Radio Time & Weather Butler unit is plugged in prior to the remote sensor 

battery installation.

 

Содержание EC-B130












Отзывы: