Battery installation:
•
Alarm clock uses AC adaptor and 1 CR2032 (included).
•
Outdoor Temperature Remote Sensor (Transmitter) requires a total of 2 (two) AAA
batteries (not included).
1. Remove compartment cover. Insert battery/batteries into the compartment on the bottom of
the unit according to the polarity direction indicated. Replace cover and snap into place.
2. Attach the adaptor into the DC jack on the base of the unit and insert the cord into a 120V
household outlet.
The battery power is designed only to provide MEMORY BACK-UP for the clock and alarm
settings (in the event of power outages or if the unit is unplugged). However, the time will not be
illuminated on the clock display. As soon as the power supply returns, the display will indicate
the correct time.
NOTE: Battery must be installed in order for clock memory back-up to operate. In the
event of a power failure or disconnection, if the battery is not installed, the clock and
alarm,
and radio memory
will need to be re-set when power is restored.
[Need to show image and instructions for how to install batteries
(do we have anything like this on file?)]
PAGE 5-9
[INSERT LINE DRAWING OF TOP OF IMAGE SHOWING BUTTONS]
Setting the Clock:
1.
TIMER:
Press TIMER button and it will display 15, 30, 45, 60 and OFF. This feature allows
you to choose how long you listen.
2.
RADIO:
Press RADIO button once and it will be at FM. Press RADIO button twice for AM.
If memory is not empty, under radio off status, pressing it once will return to last memory
station frequency, but not in memory mode.
Volume Control:
•
Press “+” to increase the volume level
1~8.
•
Press “-“ to decrease the volume level
8~1
.
