16 English
POSSIBLE CAUSE AND SOLUTION
PROBLEM
TROUBLESHOOTING
The unit fails to
power on.
Unit is not plugged in. Plug power cord into electrical outlet.
Household circuit breaker has tripped or blown fuse.
Reset circuit breaker or replace fuse. See IMPORTANT
INSTRUCTIONS.
Ground fault circuit interrupter (GFCI) has tripped. Ground
fault circuit interrupters are not recommended for use
and may cause nuisance tripping. If tripping does occur,
relocate the unit to a standard wall outlet.
Unit has overheated. Automatic Safety Shut Off has
initiated. See RESET HEATER.
Tip-over switch on bottom of unit has been tripped and
safety shut-off system has cut power to heater. Place
heater on level surface and press the power button to
restore power to the unit. See SAFETY FEATURES.
Unit is damaged or in need of repair. Cease usage and
unplug. Contact Consumer Service for assistance.
Unit is not
producing
sufficient
amount of heat.
Ensure unit is set to High Heat.
Close all doors and windows to trap heat.
Allow unit to fully heat throughout room; this may take
several minutes.
