15
English
Your heater has a multilevel safety shut-off system designed to prevent
overheating. Overheating may occur when the inlets or outlet are blocked. If
this happens, the safety shut-off system cuts power to the heater and must cool
down before normal operation can resume.
1.
Remove any obstructions.
2.
Wait 5-10 minutes, allowing heater to cool down.
3.
Press the power button ( ). Your Sharper Image Heater should now function
normally.
If the heater and other electrical products suddenly stop working at the same
time, your home circuit breaker or fuse may have tripped due to an overload of
power. Consider only running your heater on the “low” setting, only running one
heater at once and unplugging all other electrical products while running the
heater, and/or hiring an electrician to install an additional circuit to your home’s
electrical system.
NOTE:
If the safety shut-off system repeatedly shuts off your heater or if it will
not reset after following the above procedure, call Sharper Image Consumer
Services Department toll-free at 833-800-8669.
RESET HEATER