- 6 -
HUMIDIFYING A ROOM
The Personal Evaporative can also humidify the air in dry rooms. For maximum
humidification, point the device toward the center of the room and adjust the louvers
to the highest angle.
RELAXING AROMATHERAPY
For optional aromatherapy, add a few drops of your favorite scented oil into the filled
water tank. Note: scented oil is not included. Visit SharperImage.com for a selection of
organic, non-toxic essential oils (Item No. 201106).
RESTORING FACTORY SETTINGS
In the unlikely event of a system malfunction, it may be necessary to reboot the device
and restore the original factory settings. To do this, insert the power cord, then short
press the
POWER
button to turn on the device. Then, long press the
POWER
button for
3 to 10 seconds. After a successful reset, the wind speed will default to 80.
CLEANING AND MAINTENANCE
The Personal Evaporative Cooler can be cleaned as needed with a soft, thin cloth.
Always make sure the device is unplugged and completely dry inside before you start
to clean it.
1. Disconnect power cord from the device.
2. Remove the water tank and wipe clean with a soft cloth.
3. Wipe the body of the device with a soft cloth.
4. Wipe the device grilles with a soft cloth.
5. Wipe the air outlet with a soft cloth.
6. Replace the water tank.
Tip:
If you will not be using this device for a long time, dry it completely and store in a
cool, dry place. Empty the water tank and run it at full wind speed for 4 hours to dry out
the Cooling Pad. When fully dry, store the device in the original packaging if possible.
