The Sharper Image® name and logo are registered trademarks.
Manufactured and marketed by Camelot SI, LLC under license.
©Sharper Image All Rights Reserved.
-2-
Sharper Image branded drones and RC
quadcopters purchased from SharperImage.com
include a 90-day limited replacement warranty.
If you have any questions, please call Customer
Service at 1 (877) 210-3449.
IMPORTANT: To make an EMERGENCY STOP, pull
the throttle lever down and to the left. At the
same time, pull the direction lever down and to
the right. This simultaneous action — pulling
both levers down and away from the center —
is the EMERGENCY STOP function.
NOTE: Your Steady Cam Drone has many
advanced features, including video and still
photography, one-button 360° flips and one-
button return mode. Please read the full User’s
Guide to get the most fun and enjoyment from
your drone.
WARNING: Please exercise caution and common
sense when you operate this drone. Improper
use of this product can result in serious injury,
property damage or damage to the product. It is
your responsibility to comply with all applicable
laws pertaining to remote controlled and
unmanned aerial vehicle flight regulations.
7. Push the throttle lever to the highest position.
The LED light on the drone will flash slowly.
8. Pull the throttle all the way down to the lowest
position. You will hear a beep from
the transmitter.
9. The power light on the transmitter and the
power light on the drone will glow steadily,
indicating that pairing is successful.
1. Press Start/Stop to start the drone. The
motor will run slowly. Push the throttle
upward to take off.
2. To land the drone, press Start/Stop during
flight to slow down the motor. The drone will
descend and the drone will stop flying.
CUSTOMER SERVICE / WARRANTY
STEP 4: PAIRING THE TRANSMITTER
AND DRONE [CONT.]
STEP 5: TAKING OFF AND LANDING
