background image

Congratulations on your purchase of the 

Sharper Image Steady Cam Drone. This Quick 

Start Guide will give you a basic idea of what 

is involved to get started with your drone. 

If you are new to flying drones, we strongly 

recommend you start by reading the full User’s 

Guide included in this package. Your safety and 

satisfaction are our prime concerns.      

1. Remove the rechargeable battery from  

   the battery compartment of the drone.  

2. Connect the battery to the included USB  

   charging cable.

3. Plug the other end into a computer or         

   laptop USB port. You may also charge via  

   AC outlet if you have a USB to AC adapter.   

  (Adapter not included.) 

4. The LED on the cable will turn ON while       

   it is charging and turn OFF when it is fully   

   charged. 

TIP: Charge time is about 70 minutes.   

1. Unscrew the battery compartment on  

     the transmitter and open the battery door. 

2. Install 4 AA batteries (not included)        

     according to the correct polarity (“+” or “-”). 

CAUTION: Do not mix old and new batteries, and 

do not mix disposable/rechargeable batteries 

as this may damage the transmitter. 

1. The camera is held in place by two fixed  

   hooks. Press the camera against the body  

   of the drone to attach hook #1. 

2. Then, slide the camera toward the front of   

   the drone to attach hook #2. 

3. Connect the camera cable to the camera   

   power port on the drone. 

4. Gently insert the included memory card  

   into the camera.

TIP: See Page 5 of your User’s Guide for 

diagrams.

1. Make sure the transmitter and drone have 

full battery power.

2. Inspect the flying area to make sure you are 

away from crowds, trees, airports, etc. 

3. Load the battery into the battery 

compartment and connect the battery cable. 

4. Place the drone on the ground, tail end 

toward you. 

5. Turn the On/Off switch on the drone to the 

ON position. The LEDs will begin to flash. 

6. Switch ON the transmitter. You will hear two 

beeps from the transmitter.

STEP 1: CHARGE THE DRONE BATTERY 

STEP 2: INSTALL TRANSMITTER BATTERIES  

STEP 3: INSTALL THE CAMERA 

STEP 4: PAIRING THE TRANSMITTER AND 

DRONE

-1-

Item No. 205097

STEADY CAM DRONE 

Quick Start Guide

Отзывы: