E-2
●
Use the unit on a firm, level surface free from vibration.
●
Keep the unit away from direct sunlight, strong
magnetic fields, excessive dust, humidity and
electronic/electrical equipment (home computers,
facsimiles, etc.) which generate electrical noise.
●
Do not place anything on top of the unit.
●
Do not expose the unit to moisture, to temperatures
higher than 60°C (140°F) or to extremely low
temperatures.
●
If your system does not work properly, disconnect the
AC power lead from the wall socket. Plug the AC power
lead back in, and then turn on your system.
●
In case of an electrical storm, unplug the unit for safety.
●
Hold the AC power plug by the head when removing it
from the wall socket, as pulling the lead can damage
internal wires.
●
The AC power plug is used as a disconnect device and
shall always remain readily operable.
●
Do not remove the outer cover, as this may result
in electric shock. Refer internal service to your
local SHARP service facility.
●
The ventilation should not be impeded by covering the
ventilation openings with items, such as newspapers,
tablecloths, curtains, etc.
●
No naked flame sources, such as lighted candles,
should be placed on the apparatus.
●
Attention should be drawn to the environmental
aspects of battery disposal.
●
This unit should only be used within the range of 5°C -
35°C (41°F - 95°F).
●
The apparatus is designed for use in moderate
climates.
Warning:
The voltage used must be the same as that specified on
this unit. Using this product with a higher voltage other
than that which is specified is dangerous and may result
in a fire or other type of accident causing damage. SHARP
will not be held responsible for any damage resulting from
use of this unit with a voltage other than that which is
specified.
Precautions
■
General
●
Please ensure that the equipment is positioned in a
well ventilated area and ensure that there is at least 10
cm (4") of free space along the sides, top and back of
the equipment.
10 cm (4")
10 cm (4")
10 cm (4")
10 cm (4")
System connection
Make sure to unplug the AC power lead before making any connections.
92LXXXXXXXXXXX
Right
speaker
FM aerial
Wall socket
(AC 220 - 240 V ~ 50/60 Hz)
Black
Red
Left
speaker
