XL-MP110DVD
54
Radio
H
Memorising a station
You can store 40 AM and FM stations in memory and recall them at the push of
a button. (Preset tuning)
1
Perform steps 1 - 3 in “Tuning” on page 53.
2
Press the MEMORY/SET (MEMORY/DIMMER) button to
enter the preset tuning saving mode.
3
Within 30 seconds, press the PRESET (
X
or
W
) button to
select the preset channel number.
Store the stations in memory, in order, starting with preset channel 1.
4
Within 30 seconds, press the MEMORY/SET (MEMORY/
DIMMER) button to store that station in memory.
If the “MEMORY” and preset number indicators go out before the station
is memorised, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a
preset station.
When a new station is stored in memory, the station previously
memorised for that preset channel number will be erased.
Note:
The backup function protects the memorised stations for a few hours should
there be a power failure or if the AC lead is disconnected.
H
To recall a preset station
1. Press the PRESET (
X
or
W
) button for less than 0.5 seconds to select the
desired station.
H
To scan the preset stations
The stations saved in memory can be scanned automatically. (Preset memory
scan)
1. Press the PRESET (
X
or
W
) button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be tuned in
sequentially, for 5 seconds each.
2. Press the PRESET (
X
or
W
) button again when the desired station is
located.
/
H
To erase entire preset memory
1. Press the ON/STAND-BY button to enter the stand-by mode.
2. Whilst pressing down the
I6
button and the X-BASS(SURROUND)/DEMO
button, press the TUNING
W
button until “TUNER CL” appears.
D Playback (continued)
XL-MP110DVD(EN)53-54
4/28/05, 8:50 AM
54
