XL-MP110DVD
21
DVD Explanation
To watch DVD video images on the TV:
1
Turn on the TV.
2
Set the TV to “AV”, “VIDEO”, etc.
3
Turn on the unit and start play.
See page 32 for playing disc.
Note:
There is no audio signal supplied to the TV.
H
Loading a DVD (DVDs)
1
Press the ON/STAND-BY button to turn the power on.
2
Press the DVD/CD button.
3
Press the
s
1 button and within 5 seconds, press the
7
OPEN/CLOSE button to open the disc tray 1.
4
Place the DVD on the disc tray 1, label side up.
I
Be sure to place 8 cm (3") DVD(s) in the middle of the disc positions.
5
Press the
7
OPEN/CLOSE
button to close the disc tray.
Caution:
I
Do not place two discs in one disc tray.
I
Do not play discs with special shapes (heart, octagon, etc.). It may cause
malfunctions.
I
Do not push the disc tray whilst it is moving.
I
If the power fails whilst the tray is open, wait until the power is restored.
I
If the disc tray is stopped with force, “ER-CD20” will appear on the display
for 3 seconds and the unit will not function. If this occurs, press the ON/
STAND-BY button to enter the power stand-by mode and then turn the
power on again.
I
If TV or radio interference occurs during CD operation, move the unit away
from the TV or radio.
I
If a disc is damaged, dirty or loaded upside down, the disc will skip or not
play.
Preparing to watch a DVD (DVDs)
12 cm (5")
8 cm (3")
RATED LINE
VOLTAGE
ANTENNA
RIGHT
LEFT
50/9
GND
FM
75 OHMS
AM LOOP
VIDEO/AUX
IN
S-VIDEO
OUT
VIDEO
OUT
OPTICAL
VIDEO OUT
COMPOMENT
DIGITAL
OUT
Y
PR
PB
Video cable
(Supplied)
S-Video cable
(commercially available)
To TV with external terminals
S-VIDEO INPUT
VIDEO IN
/
/
XL-MP110DVD(EN)19-21
4/28/05, 8:39 AM
21