background image

E-9

Listening on Android™ devices (continued)

Listening to a CD or MP3/WMA disc (continued)

Caution:

 

Do not place two discs in one-disc-tray.

 

Do not play discs of special shapes (heart, octagon, etc). It 

may cause malfunctions.

 

Do not push the disc tray while it is moving.

 

If the power fails wait until the power is restored.

 

If TV or radio interference occurs during CD operation, move 

the unit away from the TV or radio.

 

Be sure to place 8 cm disc in the middle of the disc tray.

 

Due to the structure of the disc information, it takes longer 

to read an MP3/WMA disc than a normal CD (approximately 

20 to 90 seconds).

Note for CD or MP3/WMA disc:

 

Rewritable multi-session discs with unfinished writing, 

can still be played. 

 

To resume playback after stopping (resu-

me play) (MP3/WMA only)

You can resume playback from the track playback is stopped.

While a disc is playing, press the   button once. 

To resume play, press the CD  /  button. Playback resumes 

from the track you stopped.

To cancel the resume playback:

Press the   button twice.

 

Various disc functions

Function

Main 

unit

Remote 

control

Operation

Play

Press in the stop mode.

Pause

Press in the playback 

mode. Press the  /  

button to resume play-

back from the paused 

point.

Stop

Press in the playback 

mode.

Track 

up/down

Press in the playback or 

stop mode.

If you press the button 

in the stop mode, press 

the  /  button to start 

the desired track.

Fast 

forward/

reverse

Press and hold down in 

the playback mode.

Release the button to 

resume playback.

 

Random play

To random play all tracks:

Press P.MODE button on the remote control repeatedly until “Ran-

dom” appears. Press the  /  (CD  / ) button.

To cancel random play:

Press the P.MODE button again. “RDM” indicator will disappear.

Notes:

 

If you press the 

 button during random play, 

you can move to the track selected next by the random 

operation. However, the 

 button does not allow 

you to move to the previous track. The beginning of the 

track being played will be located.

 

In random play, the unit will select and play tracks auto-

matically. (You cannot select the order of the tracks.)

 

In folder mode on, only tracks in selected folder will be 

played randomly.

 

To disconnect the Android device

Quit the application (apps).

Disconnect the device from the USB terminal.

 

Various functions

Function Remote control

Operation

Track 

up/down

Press in the playback or 

stop mode.

If you press the button 

in the stop mode, press 

the  /  button to start the 

desired track.

Fast 

forward/

reverse

Press and hold down in 

the playback mode.

Release the button to 

resume playback.

Notes:

 

If non-compatible device is detected, “Dev No Support” 

will be displayed.

 

Controls (play / pause / skip up / skip down / fast forward 

/ fast reverse) will function based on actual Applications 

(Apps) controls used on Android devices.

 

Stop   button is invalid during Android device playback.

Android is a trademark of Google Inc.

Listening to a CD or MP3/WMA disc

MICRO COMPONENT SYSTEM XL-LS703B

 

Disc playback

Press the ON/STANDBY button to turn the power on.

Press the FUNCTION button repeatedly on the main unit to 

select CD function.

Press the   OPEN/CLOSE button to open the disc compart-

ment.

Place the disc on the disc compartment, label side up.

Press the   OPEN/CLOSE button to close the disc tray.

Press the  /  (CD  / ) button to start playback.

To stop playback:

Press the   button.

Содержание XL-LS703BH































Отзывы: