background image

04/1/28

XL-DH10N 20H_001 EN

E-19

Timer and sleep operation (Remote control only) (continued)

Cancelling the timer setting:

Press the SLEEP button for 2 seconds. The “

” indicator

disappear and the display show “TMR-OFF”.

Reusing the memorised timer setting:

The timer setting will be memorised once it is entered. To
reuse the same setting, press the SLEEP button for 2
seconds.
The “

” indicator light up and the display show “TMR-ON”.

Notes:

After selecting the playback source, when press the 
CLOCK/TIMER button to confirm, “SOURCE” will
appear and blink for 2 seconds, then change to last
function.

When the preset time is reached, playback will start at
current setting if no selected playback source is made.

The volume cannot be preset during timer setting.

The radio, compact disc and USB can all be turned off
automatically.

To confirm the remaining sleep time:

To cancel the sleep operation:

Press the ON/STAND-BY button whilst “SLEEP” is
indicated. To cancel the sleep operation without setting the
unit to the stand-by mode, proceed as follows.

Sleep and timer playback:

For example, you can fall asleep listening to the radio and
wake up to CD in the next morning.

10

Press the 

 or 

 button to select wake up source

(CD, USB, Tuner, iPod) then press the CLOCK/
TIMER button to confirm.

11

If “TUNER” is selected, press the CLOCK/TIMER
button to enter the preset selection mode.

12

To select a preset channel number, press the 

 or

 button and then press the CLOCK/TIMER button.

13

The “

” indicator lights up and the unit is ready for

timer playback.

14

Press the ON/STAND-BY button to enter the power
stand-by mode. Press the CLOCK/TIMER button to
confirm the timer setting.

15

When the preset time is reached, playback will start.

” indicator will blink to show timer playback. The

volume will increase gradually until it reaches the last
volume level.

16

When the timer end time is reached, the system will
enter the power stand-by mode automatically.

Checking the timer setting:

1

Press the CLOCK/TIMER button repeatedly to view as
follow:

Sleep operation

1

Play back the desired sound source.

2

Press the SLEEP button.

3

Within 10 seconds, press the SLEEP button repeatedly
to select the time.

10  

20  

30  

...  

80  

90

4

“SLEEP” will appear.

5

The unit will enter the power stand-by mode
automatically after the preset time has elapsed.

1

Whilst “SLEEP” is indicated, press the SLEEP button.
The remaining time is displayed for about 10 seconds.

1

Whilst “SLEEP” is indicated, press the SLEEP button.

2

Within 10 seconds, press the SLEEP button repeatedly
to select “SLEEP 00”.

To use timer and sleep operation together

1

Set the sleep time (see above, steps 1 - 5).

2

Whilst the sleep timer is set, set the timer playback
(steps 2 - 10, pages 18 - 19).

Desired time

10 - 90 minutes

Sleep operation will
automatically stop

Sleep timer setting

Timer playback setting

End time

Timer playback 
start time

Содержание XL-DH10NH

































Отзывы: