![Sharp WA-ST20(BK)/(W) Скачать руководство пользователя страница 26](http://html.mh-extra.com/html/sharp/wa-st20-bk-w/wa-st20-bk-w_operation-manual_370973026.webp)
04/1/28
E-24
ENGLISH
WA-ST200(BK)/(W)
WA-ST20(BK)/(W)
References
Troubleshooting (continued)
■
Resetting the unit
If the unit does not work properly, reset it as follows.
The unit may work properly.
1. Disconnect the USB cable.
2. Remove the battery.
3. Leave the unit completely unpowered for approximately
30 seconds.
4. Insert the battery.
5. Operate the unit.
If the unit still does not work properly, do as follows:
1. Disconnect the USB cable.
2. Remove the battery.
3. Connect the unit to a PC.
4. Proceed to the firmware update procedure (see page 23).
5. Insert the battery.
6. Operate the unit.
Error messages
Maintenance
■
Cleaning
When the unit becomes dirty
Clean it with a soft cloth. When the unit is excessively dirty, use a soft
cloth dampened in water (external surfaces only).
Clean the plugs and the connecting sockets.
If the plugs or sockets are dirty, noise may be heard.
Cleaning will prevent noise.
Caution:
●
Do not use chemicals for cleaning (petrol, paint thinner, etc.). It
may damage the cabinet finish.
●
Do not apply oil to the inside of the unit. It may cause
malfunctions.
ERROR MESSAGE
MEANING
Shut down...
The battery has run out
(Replace the battery)
Insufficient power to
operate External Devices
The battery level is low
(cannot operate SD/MMC card)
Locked
The HOLD switch is turned ON
(Turn off the HOLD switch)
Downloaded from ManualMPlayer.com Manuals