Sharp VL-Z900H-S страница 21 Скачать руководство пользователя

Страница: 21 / 132

Preparation

Powering the
Camcorder from an
AC Outlet

You can also power the camcorder from a
power outlet by using the supplied AC
adapter.

Note:

• The supplied AC adapter is specially

designed for use with this camcorder, and
should not be used as a power supply for
other camcorders.

Make sure that the Power switch is
set to OFF.

Connect the supplied power cord to
the AC power socket on the AC
adapter, and insert the AC plug into a
power outlet.

Insert the DC plug into the DC IN
jack of the camcorder.

Hold down the Lock button and set
the Power switch to

• The POWER/CHARGE (RED)

indicator lights up green.

Notes:

•

BEFORE REMOVING THE DC PLUG,
ALWAYS STOP RECORDING OR PLAY-
BACK AND TURN THE POWER OFF.

Removing the DC plug while shooting or
during playback may damage the tape by
causing it to wrap around the video head
drum or destroy the card, rendering it
unreadable and unwritable.

• Disconnect the AC adapter from the

camcorder if you will not use the camcorder
for a long period of time.

AC power socket

To power

outlet

DC IN jack

DC plug

POWER/CHARGE (RED) indicator

VL-Z900H-006-021

04.2.5, 0:56 PM

Содержание VL-Z900H-S





































































































































Результаты поиска

Содержание VL-Z900H-S

Отзывы:

Похожие инструкции для VL-Z900H-S

Бренды по названию

Популярные бренды

Sharp VL-Z900H-S, Руководство по эксплуатации

Результаты поиска

Содержание VL-Z900H-S

Отзывы:

Похожие инструкции для VL-Z900H-S

Бренды по названию

Популярные бренды