control
USING THE INFRARED
REMOTE CONTROL
Use the
remote control to opera e
the
from a distance, such as when
ou want to record
yourself in a scene, or when the
is con-
nected to a TV for use as a VCR.
2
3
4
Set the Operate switch to CAMERA or VCR.
When CAMERA is selected
Press the MENU button to display MENU 2.
If MENU 1 is displayed, press the PAGE button
to get MENU 2 on the monitor screen.
When VCR is selected
Press the MENU button to display the menu.
Make sure that the “REMOTE” menu item is set
to “ON”.
In Camera mode
In VCR mode
RBC
AUTO CORRECT
l
BDIT
l
SCRBBN'
NORMAL
S
PEED
ON
I
I
Press
the
MENU button to turn
off the menu.
Aim the remote control at the photoreceptor of
the
and press control buttons to
operate the
Notes:
.
Be careful not to allow direct sunlight or bright light from
interior
to fall onto the
photore-
ceptor, as this may prevent the remote control from
operating properly.
l
Be sure that there are no obstacles between the remote
control and the
photoreceptor.
l
When the “REMOTE” item setting is changed in either
Camera or VCR mode, the setting for the other mode is
automatically set to the same.
l
The lithium battery normally lasts about 6 months. It can
be shorter under some operating conditions. When the
lithium battery is dead and the remote control does not
operate, replace the battery with a new one by following
the instructions on page 10.
USING THE STAND
Pull out the stand and lock it into position when you
put the
on a table or other flat surface. To
stabilize the
make sure that the
CAM’s camera part stands vertically as shown.
Cautions:
l
Protect the stand from strong forces. Otherwise it may
break.
l
Press the stand in the direction of the arrow to fold it in,
as shown.
