UICK RETURN
I
23 4
L-MODE DISPLAY
button
Edit Search button
Edit Search button
Edit search
PLAY FF
Edit search
PLAY
J
QUICK RETURN
When you have been playing back what you have
recorded, and wish to quickly return to the end of
the last recorded scene, use the quick-return func-
tion.
Set the Operate switch to CAMERA.
Press the TAPE INFORMATION button to display
the quick-return button indicator (“RETURN”) in
the bottom left of the monitor screen.
Press the RETURN button
The tape will
begin winding or rewinding to the end of the last
recorded scene.
When the tape reaches the end of the last re-
corded scene, the
enters Recording
Standby mode.
Note:
l
When the TAPE INFORMATION button is pressed, if
the
cassette has been removed
since the last recording, or if
no recording has been made since the cassette was
loaded, the RETURN button indicator will not appear and
the quick return function will not be available.
EDIT SEARCH
This
lets you search, without switching
from Camera Recording mode to VCR mode, for the
point on the tape where you wish to start recording
next.
USING THE EDIT SEARCH
FUNCTION
In Recording Standby mode, make sure that the
auto/manual videography indicators or other oper-
ation indicators are not displayed on the monitor. (If
they are displayed on the monitor, turn them off by
pressing the MODE DISPLAY button.) Then hold
down the Edit Search
button
or Edit Search
button
for more than one second. When
you find the point where you want to begin re-
cording, release the button.
Notes:
l
Some picture noise appears during reverse edit search.
l
Forward edit search is performed at the same speed as
normal playback, and reverse edit search at three times
the normal playback speed.
l
Edit search cannot be performed with the remote control.
20
