Sharp ViewCam VL-NZ100S, Руководство по эксплуатации, Страница: 5 / 97

ii
Inserting a Cassette
1
Attach the power source to the
camcorder, then slide the cassette
compartment door release and open the
cassette compartment door.
• After confirmation sound, the cassette
holder extends and opens automatically.
2
Insert a commercially available cassette
fully with the window facing outwards,
and with the erasure protect tab facing
upwards.
3
Press the
W
mark gently until the
cassette holder clicks into place.
• After confirmation sound, the cassette
holder retracts automatically.
4
Wait for the cassette holder to fully
retract. Close the compartment door by
pressing the centre until it clicks into
place.
SA VE
RE C
Inserting a Card
You can use an SD Memory Card or a
MultiMediaCard for storing still images.
1
Make sure that the Power switch is set
to OFF.
2
Slide the card slot cover release and
open the card slot cover in the direction
of the arrow.
3
Insert a card into the slot as shown
below, and push it in as far as it will go.
4
Close the card slot cover.
Note:
• You cannot use a SmartMedia™ card or
Memory Stick™ media. In this operation
manual, “card” refers to the SD Memory Card
or the MultiMediaCard.
Cassette compartment
door release
Erasure protect tab
“
W
” mark
Card slot cover release
Label
Clipped corner
Write-protect
switch