Sharp VH3 Mill, Руководство по эксплуатации и список запасных частей

Страница: 21 / 28

3-15-1
Operation of manual feed
Operate longitudinal feed by hand wheel (Fig.18 (1)), cross feed by hand wheel (Fig.18
(3)), and vertical feed by hand lever (Fig.18 (2)).
If directional changing lever (Fig.18 (7)) at central front of saddle is in neutral position,
longitudinal manual feed can not be operated.
Chart of rotation of manual feed hand wheel and moving direction of working table.
3-15-2 Operation of cross power feed
Start feed motor by push button (Fig.8 (8)) and then lever (Fig.18 (4)) upwards for the
saddle to feed towards the column, and for the saddle to feed away from the column move
lever (Fig.18 (4)) downward.
3-15-3 Operation of vertical power feed
Start feed motor by push button (Fig.8 (8)) and then move lever (Fig.18 (5)) upward to
feed the knee upwards to move lever (Fig.18 (5)) downward, to feed the knee downward.
3-15-4 Operation of longitudinal power feed
Start feed motor by push button (Fig.8 (8)) and then move lever (Fig.18 (7)) right for the
table to feed from the left to the right and for the table to feed from right to left move lever
(Fig.18 (7)) to left.
Hand wheel
Table
Rotation direction
(clockwise)
Displacement
One division
Scale collar
One revolution
Longitudinal Feed
Right hand
0.01mm
(0.001 inch)
2.5 mm
(0.1 inch)
Cross feed
Forward(go far from
operator)
0.02mm
(0.001 inch)
5 mm
(0.2 inch)
Vertical feed
Upward
0.01mm
(0.0005 inch)
1.2mm
(0.05 inch)
Chung Sing 19 VERSION: 2