Sharp VH3 Mill, Руководство по эксплуатации и список запасных частей

Страница: 18 / 28

3-10 Vertical spindle quill clamping
The spindle quill clamp lever (2) (Fig.7) should be clamped the quill when turned to the
right and release the quill when turned to the left.
3-11 Fine reading device for main spindle vertical movement
When accuracy is required in vertical feed, the micrometer (Fig.15 (1)) should be
clamped to the indicator holder (Fig.15 (2)) with the clamping screw (Fig.15 (3)),and the
indicator stopper (Fig.15 (4)) should be fixed at a suitable height by the fixing knob (Fig.15
(5)) to read a fine cutting amount.
3-12 Vertical spindle head swiveling
Swiveling within the vertical plane of the spindle head is necessary when milling
slanted work. Up to 45°of longitudinal swiveling is possible.
The spindle head should be swiveled in the following manner:
(1) Loosen the 4 bolts (Fig.15 (6)) at the front of the spindle head.
(2) Turn the spindle head swiveling worm (Fig.13 (4)) with a wrench to swivel
the spindle head to the required angle while observing the scale.
(3) Tighten the 4 bolts after obtaining the required swivel.
Chung Sing 16 VERSION: 2