Sharp VC-S2000HM Скачать руководство пользователя страница 89

Страница: 89 / 123

VC-S2000HM

Note:
Whenever replacing the reel disk, perform the height check-
ing and adjustment.

Notes:
1. Hold the torque gauge by hand so that it is not moved.
2. Do not keep the reel disk in lock state. Do not allow long-

time measurement.

CHECKING AND ADJUSTMENT OF TAKE-UP
TORQUE IN REWIND MODE

• Remove the cassette housing control assembly.

• After short-circuiting TP801 provided at the center

(facing to the main PWB), plug in the power cord.

• Setting
1. Set a torque gauge to zero on the scale. Place it on the

supply reel disk.

2. Press the rewind button.
3. To calculate the remaining capacity, slowly rotate the

take-up reel disk, and then shift it into the rewind mode.

• Checking
1. Turn the torque gauge slowly (one rotation every 2 to 3

seconds) by hand in the CCW direction.

2. Make sure that the indication of torque gauge is not less

than 30mN·m (306gf·cm).

Figure 4-7.

Master plane

Reel disk height
adjusting jig

Mechanism chassis

Reel disk

0.2mm

Reel disk

CHECKING AND ADJUSTMENT OF TAKE-UP
TORQUE IN FAST FORWARD MODE

•

Remove the cassette housing control assembly.

•

After short-circuiting TP801 provided at the center
(facing to the main PWB), plug in the power cord.

•

Setting

1. Set a torque gauge to zero on the scale. Place it on the

take-up reel disk.

2. Press the FF button.
3. To calculate the remaining capacity of the play back

mode, slowly rotate the supply reel disk, and then shift
it into the forward mode.

•

Checking

1. Turn the torque gauge slowly (one rotation every 2 to 3

seconds) by hand in the CW direction.

2. Make sure that the indication of torque gauge is not less

than 30mN·m (306gf·cm).

Figure 4-9.

Torque gauge

30mN·m (306gf·cm)
or more

Supply reel disk

Idler ass'y

The gauge is held at
its maximum value.
(Red mark)

• Adjustment
1. If the rewind winding-up torque is less than the specified

value, clean the capstan D.D. motor pulley, drive belt,
and limiter pulley with cleaning liquid, rewind again, and
check the winding-up torque.

2. If the winding-up torque is still out of range, replace the

drive belt.

Figure 4-8.

Torque gauge

30mN·m (306gf·cm)
or more

The gauge is held at
its maximum value.
(Red mark)

Idler ass'y

•

Adjustment

1. If the FF winding-up torque is less than the specified

value, clean the capstan D.D. motor pulley, reel belt, and
limiter pulley with cleaning liquid, and check again.

2. If the torque is less than the set value, replace the reel

belt.

CCW

Содержание VC-S2000HM




























































































































Результаты поиска

Содержание VC-S2000HM

Отзывы:

Похожие инструкции для VC-S2000HM

Бренды по названию

Популярные бренды

Sharp VC-S2000HM, Руководство по обслуживанию

Результаты поиска

Содержание VC-S2000HM

Отзывы:

Похожие инструкции для VC-S2000HM

Бренды по названию

Популярные бренды