GB-22
A D V A N CED OPERA T I ON
SEA RCH I N G T H E V I D EO T A PE
SK I P SEA RCH I N G T H E V I D EO T A PE
You can search the tape in 30 second time intervals. To do this follow the procedure below:
1.
Press
PLA Y /X 2
(
) to start the video tape playing.
2.
Press
SK I P SEA RCH
on the remote control.
The number of times you press
SK I P SEA RCH
determines the forward search time.
•
After searching, normal playback
will resume automatically
D I GI T A L PROGRA M M E SEA RCH SY ST EM ( D PSS)
Your VCR records a marker signal on the tape at the start of each recording. These signals can
be used later to locate the starting point of a recording.
Press
D PSS
to locate a previous programme or the next programme.
For example,
1.
Load the video tape into the VCR.
2.
Press
D PSS
three times. A
3
will appear on the on-screen display, and the VCR will
fast forward to locate the third recording after the current one.
3.
Press
D PSS
once. A -
1
will appear on the on-screen display and the VCR will rewind
to locate the beginning of the current recording.
4.
To cancel the search before it has finished, press
ST OP
(
) or
PLA Y /X 2
(
) .
NOTES:
•
Recordings must be longer than 3 minutes..
•
The starting point of playback may vary.
•
This feature will only work with video tapes recorded on a VCR with the DPSS feature.
/
-1
+1
+2
+3
RECORDING 5
RECORDING 4
RECORDING 3
RECORDING 2
RECORDING 1
DPSS Signals
Current tape position
Fast Forward
Rewind
DPSS
Number
1 press = 30 seconds.
2 presses = 1 minute.
3 presses = 1 minute 30 seconds.
4 presses = 2 minutes.
741 eng.book Page 22 Tuesday, April 27, 1999 11:35 AM
http://www.usersmanualguide.com/
