GB-10
BA SI C OPERA T I ON
I M M ED I A T E RECORD I N G
SELECT I ON OF A CH A N N EL
Select the channel by using the number buttons on the remote control, or select the
next/previous channel by pressing
CH A N N EL
[
or
].
To change between single digit and 2-digit channel numbers, press
A M /PM
.
For example, for channel 24, press
A M /PM
then press
2
4
.
You can record the channel you are watching or a different channel.
1.
Insert a video tape into your VCR.
2.
Select the channel you wish to record on the VCR.
3.
To start recording, press
REC
(
).
4.
To pause during recording, press
PA U SE/ST I LL
(
).
5.
To continue recording, press
REC
(
).
6.
To stop recording, press
ST OP
(
) once.
SI M PLE T I M ED RECORD I N G:
1.
To specify a stop time, press
REC
(
).
2.
Each additional press of
REC
(
) will delay
the stop time by 10 minutes.
3.
To stop recording at any time, press
ST OP
(
) once.
NOTES:
•
If the tape ends before the recording is complete the VCR will stop recording and
rewind, or eject if the VCR is in timer record mode.
•
If the VCR ejects the video tape when you press
REC
(
) the tape is record
protected. i.e. record protection tab has been removed.
STOP 15:30
741 eng.book Page 10 Tuesday, April 27, 1999 11:35 AM
http://www.usersmanualguide.com/
