6
INSTALLING YOUR VCR
AUTO INSTALLATION
Press
STOP
to switch on the VCR.
This model will automatically tune in the TV
channels in your area, sort them into a
standard order and set the clock.
The screen opposite should be showing on
your TV.
Follow the instructions from the screens. (Auto
installation may take a few minutes.)
On completion the MOVE menu will appear
showing the preset channel order. Press
MENU
to exit.
If the clock is not automatically set, the clock screen will appear. Refer to
MANUALLY
SETTING THE CLOCK
. To check the clock has been set correctly, press
DISPLAY
until
the time appears on the display.
If you wish to customise the channel order, refer to
MANUALLY SORTING CHANNELS
.
VCR RESET
1.
Press
STOP
to switch on the VCR.
2.
Press and hold
MENU
and
CHANNEL
L
buttons together on the front of the VCR for
10 seconds.
3.
The AUTO INSTALLATION screen should now be showing on your TV.
4.
Follow the on-screen display to proceed with installation.
All the programmes should now be correctly tuned in and the clock
set.
Refer to the
CUSTOMISED INSTALLATION
chapter if
•
Your VCR could not tune automatically - due to for example poor reception.
•
You wish to re-arrange the channel order.
•
You wish to change the time on the clock or if the VCR could not set the time.
AU T O
I N S T A L L A T I ON
P R E S S S E T K E Y
T O S T AR T
AU T OMA T I S CH E E I N S T E L L UNG
Z UM B EG I NN , D I E S E T - T A S T E
DRÜCK E N
S E T : E N T E R
ME NU : E X I T
If the screen above does not appear,
follow the procedure
VCR RESET
below.
http://www.usersmanualguide.com/
