Sharp VC-A410U Скачать руководство пользователя страница 24

Страница: 24 / 38

Dimensions: 257

⳯

182 mm

F L E ( M ) S d n . B h d .

V C - A 4 2 0 U ( 2 1 - 2 4 )

Playback

Blue Screen Noise Elimination

Set the BLUE SCREEN mode to ON on the SET UP–selection screen. (See

Mode Selection

.) This function

eliminates monitor noise and mutes sound during playback of unrecorded portions of a tape and when
receiving a non-broadcasting channel. Blue Screen will also appear if the VCR is set to the Auxiliary mode but
no video signal is fed to the VCR. (The BLUE SCREEN mode is set to ON at the factory.)

• Blue Screen does not function during still picture, variable slow motion and video search.
• Blue Screen may not function properly if the broadcast signal is too strong or too weak.
• Blue Screen does not function during playback of a tape with noise recorded.
• If the antenna signal is weak while recording a TV program or if the input signal is weak while tape dubbing, the monitor

screen may turn blue since the unit may not recognize whether or not a proper signal is being received. In this event, set the
BLUE SCREEN mode to OFF.

Quick Start with Full Loading Mechanism

Your VCR has a standby function (Full Loading Mechanism) to allow immediate recording and playback.
After pressing

REC

PLAY

, it takes about 2 seconds until recording or playback is engaged when in the

standby mode.

Full Automatic Playback

The Full Automatic Playback lets you enjoy playback with ease. When you insert a cassette with the erasure
protection tab removed, your VCR automatically turns on the power and plays back the tape. When the tape
reaches its end, the VCR automatically rewinds the tape, ejects it and turns off the power.

• If the erasure protection hole is covered, press

PLAY

after the power turns on automatically.

Only for Hi-Fi models

Audio Output Mode

our VCR has 3 channels for audio recording (2 on the Hi-Fi track and 1 on the linear track). You can select the

audio output channels in playback mode on the SET UP–selection screen. The following shows which audio
channels will be heard when a stereo Hi-Fi video
cassette is played back while a stereo system is
properly connected to the VCR.
(See

Mode Selection

Hi-Fi

Ⳮ

mode:

Normally, select Hi-Fi

Ⳮ

mode on the SET UP–

selection screen: both the left (L) and right (R) audio
channels will be taken from the Hi-Fi audio track.
Normally you will not have to change to another
mode.
(See

Recording MTS (Multi-channel TV Sound)

Broadcasts

Hi-Fi

mode:

The left channel of the Hi-Fi audio track will be played back through both speakers.

Hi-Fi mode:

The right channel of the Hi-Fi audio track will be played back through both speakers.

Linear mode:

The audio signal recorded on the linear audio track will be played back through both speakers.

• When video cassettes recorded on a non-Hi-Fi VCR are played back or the Hi-Fi audio output level is poor, the audio signal

recorded on the linear audio track will automatically be played back regardless of the audio output mode.

Hi-Fi