Recording with the Timer
The timer can be set manually for automatic recording of up to 8 events over a 365 day period.
PREPARATION
the video channel on your TV. Turn on the VCR (See page item 3).
l
Load the cassette, ensuring the erasure protection hole is covered. The VCR power will automatically turn on
that the clock is displaying the correct time. (See Setting the Clock on page
PROCEDURE
Example: Recording channel position 47 in SP mode from 12:00 PM to
PM, December 15, 1999, if the
present time is
(morning), December 14, 1999.
mode and press SET.
Select the timer position with
and press SET.
l
If the timer positions 1 to 4 have already been set, the
screen changes
(timer positions 5 to 8).
Set the date for timer recording with the numeric buttons
or
on the remote control and then press . .
l
First set the “day” digits and then “month”. If there is
only one “day” or one “month” digit, enter a 0 first.
If you want to record only once, press and go to step
Otherwise, select
(DAILY)” to record at the same
time each day or
(WEEKLY)” to record at the same
time each week by pressing or
and then pressing
[Channel]
- -
Set the channel number using the numeric buttons or
and then press
AUDIO/VIDEO terminal
on the VCR, press
to select an AV
channel. (When an AV position is selected, “AV” is displayed where
a channel position number is usually displayed.)
l
can also be used to set the date and time instead of the numeric buttons.
l
Press 0 first if the day, month,
hour or minute is a single digit.
Continued on next page
2 2
