-English-
1
Engl
ish
Sv
ens
k
a
Dansk
Suomi
Norsk
Ελληνικ
ά
Mag
y
ar
Türkçe
Quick Reference Guide
Installation
1. Connect the handset and place it on the
handset rest.
2. Plug the power cord into a 220 - 230 V,
50 Hz, earthed (2-prong) AC outlet.
Caution:
The power outlet must be
installed near the equipment and must
be easily accessible.
3. Connect the telephone line cord to the
TEL. LINE
jack and a wall telephone
jack.
4. Attach the paper tray and paper tray
extension.
Loading the imaging film
1. Open the operation
panel (press
➊
).
2. Remove the imaging
film from its
packaging. Cut the
band that holds the
rolls together.
3. Insert the green gears.
IMPORTANT:
Do NOT discard the
green gears. They are not included with
replacement imaging film.
4. Insert the film into the print
compartment.
5. Rotate the front gear
as shown until the
film is taut.
TEL.SET
TEL.LIN
E
Click!
1
2
1 slot
2 slots
Make sure
the gears fit
into the slots
in the ends of
the rolls.
Thick roll to rear
Fit ends
of rolls
onto hubs
Ensure that
both gears
are properly
seated by
pushing
down lightly
on the gears.
all.book Page 1 Friday, March 25, 2005 2:54 PM
Содержание UX-P410
Страница 14: ......