Sharp UX-E800, Руководство по эксплуатации

Страница: 89 / 390

88
4. Receiving Faxes
Using TEL/FAX Mode
When the reception mode is set to TEL/FAX, your fax machine
automatically answers all calls on one ring. After answering, your fax
monitors the line for about five seconds to see if a fax tone is being
sent.
♦
If your fax machine detects a fax tone (this means that the call is an
automatically dialled fax), it will automatically begin reception of
the incoming document.
♦
If your fax machine doesn’t detect a fax tone (this means that the
call is a voice call or manually dialled fax), it will make a ringing
sound (called pseudo ringing) for 15 seconds to alert you to answer.
If you don’t answer within this time, your fax will send a fax tone to
the other machine to allow the calling party to send a fax manually
if they desire.
Note:
Only the fax will alert you to voice calls or manually dialled faxes
by pseudo ringing. An extension phone connected to the same line will
not ring after the connection has been established.
To select TEL/FAX mode,
press the
RECEPTION
MODE key until the arrow
in the display points to
TEL and FAX.
TEL FAX
A.M.
RECEPTION MODE
all.book Page 88 Monday, August 28, 2000 3:55 PM