Sharp UX-310 Скачать руководство пользователя страница 34

Страница: 34 / 112

<P=002>

Note: Letters or graphics on the edges of a document will not be
scanned.

5 mm

4 mm

5 mm

Letters in the
shaded area will
not be scanned.

Other restrictions

♦

The scanner cannot recognise yellow, greenish yellow, or light
blue ink.

♦

Ink, glue, and correcting fluid on documents must be dry before
they pass through the document feeder.

♦

All clips, staples, and pins must be removed from documents
before loading in the feeder. If these are not removed, they may
damage the machine.

♦

Documents which are patched, taped, torn, smaller than the
minimum size, carbon backed, easily smudged, or have a slippery
coated surface should be photocopied, and the copy loaded in the
feeder.

Transmittable Documents

Содержание UX-310

















































































































Результаты поиска

Содержание UX-310

Отзывы:

Похожие инструкции для UX-310

Бренды по названию

Популярные бренды

Sharp UX-310, Руководство по эксплуатации

Результаты поиска

Содержание UX-310

Отзывы:

Похожие инструкции для UX-310

Бренды по названию

Популярные бренды