Sharp UP-820N, Инструкция по эксплуатации

Страница: 210 / 277

— 208 —
Stacked report
Your POS terminal is equipped with the stacked report printing function that enables multiple X/Z reports to be
printed in sequence by a single request.
Procedure
You can select a maximum of twenty reports from the stacked reports list.
Some reports can be set their parameters such as “START CODE” and
“END CODE.”
• 01 DEPARTMENT (Use the numeric entry method)
Full department report
Parameter: Start department code/end department code (1 thru 99)
• 02 DEPT.IND.GROUP (Use the numeric entry method)
Individual group report on departments
Parameter: Department group no. (1 thru 9)
• 03 DEPT.GROUP TOTAL
Full group total report on departments
• 04 MARKDOWN DEPT. (Use the numeric entry method)
Markdown for department report
Parameter: Start department code/end department code (1 thru 50)
• 05 PLU/UPC (Use the numeric entry method)
PLU report by designated range
Parameter: Start PLU code/end PLU code (1 thru 999999)
• 06 PLU BY DEPT (Use the numeric entry method)
PLU report by associated departments
Parameter: Department code (1 thru 50)
• 07 PLU IND. GROUP (Use the numeric entry method)
PLU report by individual group
Parameter: PLU group no. (00 thru 99)
• 08 PLU GROUP TOTAL
Full group total report on PLUs
• 09 PLU STOCK (Use the numeric entry method)
PLU stock report
Parameter: Start PLU code/end PLU code (1 thru 99999)
• 10 PLU ZERO SALES (Use the selective/numeric entry method)
PLU zero sales report
Parameter: 1 ALL/2 BY DEPT.
When “2 BY DEPT.” is selected, enter a department code (1 thru 99).
• 11 PLU MINIMUM STOCK (Use the numeric entry method)
PLU minimum stock report
Parameter: Start PLU code/end PLU code (1 thru 99999)
• 12 PLU PRICE CATEGORY (Use the numeric entry method)
PLU price category report
Parameter: Start unit price/end unit price
The screen continues.
Select a stacked report no. from
the stacked reports list.