Sharp UP-820N, Инструкция по эксплуатации

Страница: 132 / 277

— 130 —
PLU/UPC (continued)
• REPEAT ROUND (Use the selective entry method)
NO : Inhibits repeat round registration
YES : Allows repeat round registration
• DOUGHNUT EXEMPT (Use the selective entry method)
YES : Enables the doughnut tax exemption (Canadian tax system).
NO : Disables the doughnut tax exemption.
• DATA ENT. JOB# (Use the numeric entry method)
Key data entry job number (Capture job number: 0 thru 99)
When 0 is programmed, data entry is inhibited.
• NON-ACCESS (Use the selective entry method)
NON DEL : Not delete non-accessed UPCs by Z1 report.
DEL. BY Z : Delete non-accessed UPCs by Z1 report.
NOTE
For PLU, it is fixed to “NON DEL.” .
Dynamic UPC
NOTE
For the UPC codes available to this POS terminal and type UPC files, please refer to the Chapter 14.
After you select 3 DYNAMIC UPC on the ARTICLE menu, enter an UPC code or select a pertinent code. The same
items (except MIN. STOCK) as the PLU/UPC described in the previous section will appear. Please refer to the
PLU/UPC section for entering values or selecting options. The data will be saved in the Dynamic UPC file.
PLU range
You can program the PLUs by a range as follows:
Procedure
Enter a value or select an option for each item as follows:
• START CODE (Use the numeric entry method)
Starting PLU code (max. 5 digits)
• END CODE (Use the numeric entry method)
Ending PLU code (max. 5 digits)
• OPERATION (Use the selective entry method)
MAINTE : Enables you to change the setting you have
programmed.
NEW&MAINTE : Enables you to change the current setting when
the specified codes have already been created or
to create new codes when the specified codes
have not been created yet.
DELETE : Enables you to delete a specified range of PLUs.
The screen is continues in the
same format as screens shown in
section “ PLU/UPC”