9. F-ROM DISK: UP-F04RB
Make sure to save data before installing this option.
1) Remove the top cabinet.
2) Install the option ROM disk
1
to the Option ROM/RAM connector
CN19
2
on the Main PWB.
a) Insert the ROM disk aslant into the option ROM/RAM connec-
tor.
b) Push the ROM disk until the ROM disk is locked by the arms of
option ROM/RAM connector.
*
Up to 2 UE-F04RB’s can be installed on the option ROM/RAM
connector.
*
Be careful of the direction of ROM disk to be installed. Install
the ROM disk with the notch part of the PWB (Figure A) come
right. Installing the ROM disk in the wrong direction may dam-
age the connector part or make the machine out of order.
3) Remove the option ROM disk.
a) Open the arms of option ROM/RAM connector right and left.
b) The ROM disk will be lifted automatically.
10. Cautions for UP-F04RB and
UP-P02MB
Caution 1
Back up all data in the standard RAM disk (PS-RAM) before installing
the UP-F04RB/UP-P02MB.
Caution 2
Do not insert the UP-F04RB/UP-P02MB upside down into the con-
nector (CN1) on the UP-5700 main PWB upside down.
If you try to insert the UP-F04RB/UP-P02MB upside down, the UP-
F04RB/UP-P02MB can only be inserted halfway.
The RAM disk on the UP-5700 may be broken.
Always insert the UP-F04RB/UP-P02MB with its upper side directed
upwards (The upper side of UP-F04RB/UP-P02MB is the same side
as the notch of the connector part).
Caution 3
Install and remove the UP-F04RB/UP-P02MB as follows:
Handling the UP-F04RB/UP-P02MB forcibly may break the connector
(CN1) lever.
Installing UP-F04RB/UP-P02MB
1) Insert the terminal side of UP-F04RB/UP-P02MB into the connec-
tor with the parts face upwards.
installing one ROM
disk on the upper
slot.
installing one ROM
disk on the lower
slot.
installing one ROM
disk on the upper
and lower slots res
-pectively.
1
A
2
Upper side
Upper side
– 5 –