EN-8
BEFORE FIRST USE
• To maintain the quality of the filter, it is installed
in the product and packaged in a plastic bag.
• Be sure to stop operation
and unplug the product
before filter installation or
replacement.
1.
Remove the Back Panel.
Back Panel
2.
Take out the filters from the plastic
bag.
3.
Install the filters in the correct order
as shown.
HEPA Filter
Deodorizing Filter
Tag
4.
Install the Back Panel.
Click
NOTE
• If the Back Panel is not installed correctly,
"
" will be displayed and the operation will
be stopped. (Page 22)
• When replacing the filters, making a memo of
the start of use date is recommended.
• Do not operate the product without the filters.
FILTER INSTALLATION
EN-9
ENGLISH
• When humidifying, fill the Humidifying Tray with
water.
• When not humidifying, discard the water in the
Humidifying Tray.
1.
Pull out the
Humidifying Tray.
NOTE
• When removing and installing the
Humidifying Tray, be careful not to spill any
water.
2.
Fill the Humidifying Tray with
tap water using method “A”
or “B”.
B
A
NOTE
• The Humidifier Float will float up when tray
is filled with water.
• Slowly fill it with water to avoid splashing.
• Do not fill beyond the “FULL” indicator.
• When carrying the Humidifying Tray, hold it
with both hands or grip the Tray Handle.
• Clean the Humidifying Tray if it becomes
dirty or there is a noticeable odour.
REFILLING THE HUMIDIFYING TRAY
About Tray Handle
•
When holding and carrying the
Humidifying Tray, use tray handle
Tray Handle
•
When cleaning the Humidifying Filter,
you can turn the Tray Handle down on
its side.
•
After cleaning, install the Tray Handle
back in its original position.
NOTE
• Return the Tray Handle to its original
position before installing.
3.
Carefully install the
Humidifying Tray.
