Sharp SD-2060 Скачать руководство пользователя страница 55

Страница: 55 / 87

COPIER

TROUBLE?

MISFEED REMOVAL

When a misfeed occurs, the copier will stop.
The message “

OPEN THE COPIER DOORS AND

REMOVE PAPER AS INDICATED. PRESS

✱

KEY

FOR RECOVERY INSTRUCTIONS.

” will appear with

a display of paper misfeed locations. Press the IN-
FORMATION and SCROLL DISPLAY keys for more
detailed information as necessary.

If paper becomes accidentally torn during removal,
be sure to remove all pieces.
Be careful not to damage the photoconductive drum
or the corona wires.

First confirm the misfeed locations.
For misfeeds in an optional sorter or staple sorter, see
their respective sections. (pages 80 and 81)

Misfeed in the RADF

When the RADF misfeeds an original sheet, the copier
will stop and the misfeed message will appear.

Check the locations A, B, and C to remove misfed
originals.

<J002A>

DOCUMENT FEEDER ERROR.
OPEN DOCUMENT FEEDER COVERS AND CLEAR
DOCUMENT FEEDER PAPER PATH.
PRESS

✱

KEY FOR RECOVERY

INSTRUCTIONS.

(

p.53)

(

p.55)

(

p.59)

(

p.64)

(

p.56)

(

p.61)

(

p.56)

Misfeed removal

Downloaded from:

http://www.usersmanualguide.com/

Содержание SD-2060
























































































Результаты поиска

Содержание SD-2060

Отзывы:

Sharp SD-2060, Руководство по эксплуатации, Страница: 55 / 87

Результаты поиска

Содержание SD-2060

Отзывы: