manualshive.com logo in svg

Sharp SD-2060, Руководство по эксплуатации, Страница: 54 / 87

Поделиться
Скачать
Sharp SD-2060 Скачать руководство пользователя страница 54

52

I

I

I

I

I

I

I

SUPPLIES

I

STORAGE OF SUPPLIES

Standard SD-2060 supplies replaced by the user include copy  pa-
per, toner and staple cartridges for the optional staple sorter.
For best copying results, be sure to use only SHARP products.

The SD-2060 Copier/Duplicator has advanced process control tech-
nology which improves copy quality uniformity. This feature stabi-
lizes copy quality throughout the life of the photoconductive drum by
automatically compensating for changes in drum characteristics due
to wear, operator use patterns, and environmental conditions. The
automatic adjustments are made in response to a sensor that de-
tects the reflectance characteristics of a special area of the drum.
Warning:
This feature requires drums containing the special reflectance area
(recommendable genuine SHARP photoconductive drum). If you
use other drums, the process control system cannot run properly. To
prevent improper control and possible damage to the copier, the
copier will make only low level density copies.

Proper storage

Storage of supplies

Store SD-2060 supplies where it is

●

clean and dry

●

an even temperature

●

not exposed to direct sunlight

Store copy paper in the wrapper and lying flat.

●

Paper stored in packages standing up or out of the wrapper
may curl or become damp, resulting in paper misfeeds.

2

1

Downloaded from: 

http://www.usersmanualguide.com/

Содержание SD-2060
























































































Отзывы:

Нет отзывов