E – 6
BEFORE OPERATING
* This oven is preset with the OPERATION GUIDE
in English.
To assist you in programming your oven, the
operation guide will appear in the display.
Getting Started
Your oven has an Energy Save Mode. This facility
saves electricity when the oven is not in use.
CAUTION:
In Energy Save Mode, if you do not operate the oven
for 3 minutes or more (i.e. after closing the door,
or pressing the
STOP/CLEAR
pad, or at the end of
cooking), you will not be able to operate the oven
until you open and close the oven door.
NOTE:
When you set Child Lock or Demonstration Mode,
Energy Save Mode will be cancelled temporary.
Stop/Clear
Press the STOP/CLEAR pad twice.
To Cancel a Programme
During Cooking
Some smoke and odor may occur for a while at
the beginning of Grill, Preheat, Convection, COMBI
cooking or Automatic Operations (except Rice
Menu, Reheat, Steam Menu and Easy Defrost), but
the oven is not out of order.
To remove the cause of the smoke and odor,
operate the oven without food for 20 min. on Grill
using top and bottom grills before the fi rst use and
after cleaning.
Heating without Food
Power Interruption
If the power goes off or the display is blank, refer
to Step 2 and 3 in the above Getting Started
to resume normal operation. Your oven works
normally, however there is a case that previous
setting such as Child Lock, Auto Start, and
Demonstration Mode will be cancelled. The Display
in Clock Set mode and Energy Save Mode under
different conditions is listed on page E-7 for your
reference.
Step
Procedure
1
Plug the oven into a power point.
Nothing will appear on the display at
this time.
2
Open the door. The display will show
ENERGY SAVE MODE TO CANCEL
ENERGY SAVE MODE SET THE CLOCK.
3
Close the door.
This display will show “. 0”, and now you
can ready to use the oven.
Step
Procedure
1
Ensure that no food is in the oven.
Press the GRILL pad 3 times.
2
Enter the heating time (20 min.) by turning
the
KNOB
.
3
Press the START pad.
The timer will begin to count down.
When it reaches zero, all indicators will
go out and audible signal will sound.
NOW COOLING will appear on the display
after opening and closing the door.
The cooling fan will remain on until the
oven cavity has been cooled.
IMPORTANT:
During this operation, some smoke
and odor will occur. Therefore open the
windows or run the ventilation fan in the
room.
4
Open the door to cool the oven cavity.
WARNING:
The oven door, outer cabinet and oven cavity
will become hot and pay attention to avoid
burn when cooling the oven.
x 3
Press the STOP/CLEAR pad once to:
1. Stop the oven temporarily during cooking.
2. Clear if you make a mistake during programming.
R-899P [EN].indd Sec1:6
R-899P [EN].indd Sec1:6
8/13/09 2:36:39 PM
8/13/09 2:36:39 PM
