6
OPERATION OF TOUCH CONTROL PANEL
The operation of the oven is controlled by pressing the appropriate pads arranged on the surface of the control panel.
An entry signal tone should be heard each time you press the control panel to make a correct entry.
In addition the oven will beep for approximately 2 seconds at the end of the cooking cycle, or 4 times when a
cooking procedure is required.
Touch Control Panel Layout
Control Panel Display
1. NUMBER PADS
Press to enter cooking times, clock time, weight or
quantity of food.
2. POWER LEVEL PAD
Press to select microwave power setting.
If power is not selected, it automatically defaults to
100%.
3. TIMER PAD
Press to set Timer.
4. STOP/CLEAR PAD
Press to clear during programming.
Press once to stop operation of oven during cook-
ing; press twice to cancel cooking programme.
5. CLOCK PAD
Press to set Clock.
6. INSTANT COOK/START PAD
Press once to cook for 1 minute on 100% or
increase by 1 minute multiples each time this pad
is pressed during manual cooking. Press to start
oven after setting programmes.
7. EASY DEFROST PAD
Press to defrost frozen food by entering quantity.
8. QUICK AND EASY PAD
Press to select Quick and Easy menus.
9. HEALTHY MENUS PADS
Press to select "Healthy Menus" menu.
10. EXPRESS MENUS PADS
Press to select "Express Menus" menus.
11. SENSOR MENUS PADS
Press to select Sensor Cook menus.
12. MORE, LESS PADS
Press to increase/decrease the time in one minute
increments during cooking or to alter the cooking
result for the automatic operations.
Indicator
1
2
3
5
6
4
7
8
9
10
11
12
SCA/SCNZ R490N O/M,P06-
08.2.21, 3:32 PM
6